I hear a tone when there is a call on hold? How do I disable it?
By default, the device will play a tone for you every 30 seconds a call is on hold. You can disable it or change the tone interval in the device's web interface:
- Sign in to device's web interface. (How to access the Yealink phone's web interface)
- Click the Features tab.
- In the left-side navigation menu, click General Information.
- Change the Play Hold Tone and Play Hold Tone Delay settings.
Related Articles
Ghost Call Prevention
Many of us have experienced a ghost call at some point in time and it is frustrating. No I am not referring to some paranormal occurrence here that requires the Ghostbuster team, though if it happens in the wee hours it can have a similar affect on ...
No Dial Tone Troubleshooting
VoIP relies on a good Internet connection for successful calls. Go through the following steps to isolate your dial tone problem. Is your Internet working? Run our VoIP and Internet test to verify. Power cycle your Analog Telephone Adapter (ATA) or ...
How to Disable SIP ALG on Popular Routers
SIP ALG (Application Layer Gateway) is a mechanism found in most routers that rewrites packets transmitted across the device. Certain protocols are processed by the application layer gateway (ALG) and rewritten to allow better flow through a firewall ...
How to start a three-way call
Make a call. Tap or press Conference. The current call will be placed on hold. Enter or select number that you want to add to the call, then tap or press Conference. A new call will start. Tap or press Conference to merge the two calls in to a ...
Device doesn't play dial tone
Check for any loose connections and that the phone has been installed properly. Switch between the handset, headset (if present) and speakerphone to check whether the dial tone works for a different audio device. If the dial tone exists on another ...