How to I reboot the device?

How to I reboot the device?

You can reboot the device to resync it with the provisioning server.


To reboot a Yealink phone, you can press and hold the X button for at least 10 seconds

  • Press and hold the X button, which is located under the Arrow Cluster
  • A prompt will appear asking if you want to reboot the phone
  • Press OK to confirm

      • Related Articles

      • Device doesn't play dial tone

        Check for any loose connections and that the phone has been installed properly. Switch between the handset, headset (if present) and speakerphone to check whether the dial tone works for a different audio device. If the dial tone exists on another ...

      • Using a Bluetooth headset with a Yealink device

        To activate the Bluetooth mode: 1. Press Menu >Basic >Bluetooth. 2. Press < or > , or the Switch soft key to select On from the Bluetooth field. 3. Press the Save soft key to accept the change. You can verify this by checking for the Bluetooth Icon ...

      • How can I find the basic information of the device, such as IP address and firmware version?

        Press the OK key when the the device is idle to check the basic information, such as IP address and firmware version.

      • Devices doesn't ring

        Check the ringer volume on the phone. To adjust the ringer volume, press the Volume key when the phone is on-hook and idle. If these steps don't resolve the issue, we’ll need to investigate further. Submit a support ticket here, including following ...

      • I hear a tone when there is a call on hold? How do I disable it?

        By default, the device will play a tone for you every 30 seconds a call is on hold. You can disable it or change the tone interval in the device's web interface: Sign in to device's web interface. (How to access the Yealink phone's web interface) ...