Headset not working

Headset not working

  1. Make sure the headset model is compatible with your device. Visit the Yealink support site for more information.
  2. Check that the headset cord is fully connected to the headset jack on the phone.
  3. Check that the headset mode is activated.
  4. Check that the headset volume is adjusted to an appropriate level.
  5. If these steps don't resolve the issue, we’ll need to investigate further. Submit a support ticket here and we’ll look into the issue.

    • Related Articles

    • Using a Bluetooth headset with a Yealink device

      To activate the Bluetooth mode: 1. Press Menu >Basic >Bluetooth. 2. Press < or > , or the Switch soft key to select On from the Bluetooth field. 3. Press the Save soft key to accept the change. You can verify this by checking for the Bluetooth Icon ...

    • Device doesn't play dial tone

      Check for any loose connections and that the phone has been installed properly. Switch between the handset, headset (if present) and speakerphone to check whether the dial tone works for a different audio device. If the dial tone exists on another ...

    • No Dial Tone Troubleshooting

      VoIP relies on a good Internet connection for successful calls. Go through the following steps to isolate your dial tone problem. Is your Internet working? Run our VoIP and Internet test to verify. Power cycle your Analog Telephone Adapter (ATA) or ...

    • Phone and Voice Quality Issues

      While most Tele Express calls have crystal clear audio, some calls may have call quality issues. If you're experiencing call quality issues, there may be some simple solutions to identify and fix the problem. We put together this guide to help ...