Pairing a Yealink CP930W to a W60B base station

Pairing a Yealink CP930W to a W60B base station

If you need to pair the CP930W with a new base, you first need to put the base in pairing mode by long pressing the button on the W60B. After the handset light starts blinking, release the button, and return to the CP930W.

To perform an easy registration, simply press the "Reg" soft key when it appears under the "Unregistered!" message on the screen.

To perform a custom / "Normal" registration, follow these steps:

  1. Tap the OK soft key and then select Register Handset
  2. Select the desired base station(Base 1 unless otherwise noted) and then tap the OK soft key. The CP930W will begin searching for the base station.
  3. Tap the OK soft key after searching a base station successfully.
  4. Enter the base station PIN (default: 0000), and then tap the Done soft key to complete the registration.
  5. To register to multiple base stations (if you have more than one / multiple locations), move the CP930W within range if required, and then tap the Menu -> Settings -> Registration -> Register Handset, then repeat steps 2 through 4 as required.

If the screen continues to display "Searching for Base", check that your W60B is powered on, within range, and in pairing mode (handset light will be flashing).

    • Related Articles

    • Exporting logs and config files (Yealink)

      How to export logs and configuration files using the phone's web interface: Providing the support team with logs and/or configuration files can help them troubleshoot issues you may be having. You can download these files from the web interface and ...

    • Factory Reset the Yealink Cordless Phone (w56h / w60b / w70b)

      From the handset: On the handset: Hit the "OK" button Use the arrows to select the "Settings" icon (looks like a gear) Go down to option 8 "System Settings" and hit "OK" Go down to "Base Reset" and hit "OK" Enter the pin: 0000 Hit "OK" Select "Reset ...

    • How to access the Yealink phone's web interface

      Open a web browser on a computer that's connected to the same network as the phone. Enter the phone's IP address. (How to obtain the Yealink phone's IP address) Log in to the phone's web interface as an admin. Note: The default admin username and ...

    • Using a Bluetooth headset with a Yealink device

      To activate the Bluetooth mode: 1. Press Menu >Basic >Bluetooth. 2. Press < or > , or the Switch soft key to select On from the Bluetooth field. 3. Press the Save soft key to accept the change. You can verify this by checking for the Bluetooth Icon ...

    • Yealink SIP-T46U – Wi-Fi Network Connection and Management

      The Wi-Fi function of the Yealink T46U allows you to enjoy SIP connectivity without network cables. This reduces clutter, lets you easily move the phone around, or serves when a network port is unavailable or in offices with a Wi-Fi only network. ...